Description
mobilcut-100-new
MOBILCUT 100 NEW
£172.24 – £1,690.96
Mobilcut 100-New is a conventional milky soluble oil that readily mixes with different waters to form stable emulsions. It shows good pH stability and especially suitable for harder water. Its versatile performance makes it suitable for a general machining of machine steels and copper alloys in light to moderate duty metalworking operations such as milling, turning, sawing, boring, drilling and reaming.mixes with different waters to form stable emulsions. It shows good pH stability and especially suitable for harder water. Its versatile performance makes it suitable for a general machining of machine steels and copper alloys in light to moderate duty metalworking operations such as milling, turning, sawing, boring, drilling and reaming.
Features and Benefits
The Mobilcut series are designed to help increase the productivity of modern machine shops by providing high performance features.
| Features | Advantages and Potential Benefits |
| Form stable emulsions and solutions | Ease of use and maintenance |
| Long term inherent stability | Increases batch life and reduces unpleasant odors |
| Low foaming potential | Improved performance even in high pressure systems |
| Resists formation of sticky residues | Improves machine cleanliness |
| High degree of corrosion protection | Reduces machine maintenance and rework of materials |
| Good separability from fines | Improves filterability and surface finish |
| Wide Range of applicability | Potential to consolidate products and reduce inventories |
| Compatible with high performance Mobil Vactra Oil (slideway lubricants). | Easy separation and removal of tramp oil |
| Neutral Odour | Enhances the workplace environment |
Applications
Mobilcut 100-New: General machining of easy to machine steels and copper alloys in light to moderate duty machining operations such as milling, turning, sawing, boring, drilling and reaming. Fluid type is milky emulsion. Mineral oil content is typically 70%. Optimal water hardness range is from 10 to 25 °dH and can go up to 60°dH in use.
Refractometer factor is 1.0
Recommended concentrations for typical operations:
- Low alloy steels – milling, turning: 7-12%
- Carbon alloy steels, difficult machining: 7-12%
- Aluminum machining: 7-12%
Properties and Specifications
| Properties | |
| Kinematic Viscosity 20 C, mm2/s, DIN EN ISO 3104 | 120 |
| Density 15 C, kg/m3, DIN EN ISO12185 | 907 |
| pH-Value 5.0% in 20 deg dH Water, DIN 51369 | 9 |
| Appearance, AA.Lab.101 | Liquid Brownish |
| Appearance, 5.0% in 20 deg dH Water, AA.Lab.101 | Milky |
Additional information
| Weight | N/A |
|---|---|
| pack size | 20 litres, 208 litres |